PRODUCT
2036 aluminum this is an early application of a kind of hard aluminum, commonly known as standard hard aluminum, with moderate strength, annealing, quenching and hot state plasticity is good, heat treatment can be strengthened, quenching and natural aging state in use, spot welding weldability is good.
2036 aluminum alloy features: high strength, a certain heat resistance, can be used for working parts below 150℃.
The strength of 2036 alloy is higher than that of 7075 alloy.
2036 aluminum alloy features: high strength, a certain heat resistance, can be used for working parts below 150℃.
The strength of 2036 alloy is higher than that of 7075 alloy.
SECC Electro Galvanized Steel Coil
SECC Electro Galvanized Steel is resistant to fingerprints.
It has excellent corrosion resistance, and maintains the processability of cold-rolled coils.
It is a stamping material that is coated with a zinc layer on the surface of the cold rolled sheet.
It has excellent corrosion resistance, and maintains the processability of cold-rolled coils.
It is a stamping material that is coated with a zinc layer on the surface of the cold rolled sheet.
Xar 400 500 Wear Resistant Steel Plate
XAR is available in various grades from
300 HBW to 600 HBW and plate thicknesses
from 1/6” to 4” (4 to 100 mm), tailored to particular applications, e.g.
300 HBW to 600 HBW and plate thicknesses
from 1/6” to 4” (4 to 100 mm), tailored to particular applications, e.g.
Galvanized steel coil is to prevent corrosion on the
surface of steel coil and prolong its service life.
A layer of metal zinc is coated on the surface of steel coil,
which is called galvanized steel coil.
surface of steel coil and prolong its service life.
A layer of metal zinc is coated on the surface of steel coil,
which is called galvanized steel coil.
The main alloying elements in 6061 alloy are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect.
Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
High strength abrasion resistant steel plates GB/T709 NM400 offers super weldability. Meanwhile,
GBT24186 NM450 abrasion resistant metal plates are additionally used as high energy structural
steel with greater than 850MPa yield strength.
Wear-resistant steel NM450 is an abrasion resistant plate with a hardness of 450 HBW,
meant for functions where calls for are imposed on abrasion resistance together with good
cold bending properties. Abrasion Resistant Steel Plate
ApplicationsThe AR235 plates are meant for reasonable wear purposes the place it provides
improved wear resistance relative to structural carbon metal.
GBT24186 NM450 abrasion resistant metal plates are additionally used as high energy structural
steel with greater than 850MPa yield strength.
Wear-resistant steel NM450 is an abrasion resistant plate with a hardness of 450 HBW,
meant for functions where calls for are imposed on abrasion resistance together with good
cold bending properties. Abrasion Resistant Steel Plate
ApplicationsThe AR235 plates are meant for reasonable wear purposes the place it provides
improved wear resistance relative to structural carbon metal.
6082 is a heat-treatable alloy with good formability, weldability, machinability and corrosion resistance.
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.
7075 aluminum alloy is a cold - treated forging alloy, high strength, far better than mild steel.
7075 is one of the strongest alloys commercially available.
Under heat treatment, can achieve very high strength characteristics.
7075 is one of the strongest alloys commercially available.
Under heat treatment, can achieve very high strength characteristics.
NM400 WEAR RESISTANT STEEL PLATE
NM400 is one kind of Chinese wear/abrasion resistant steel plates,
which is well received in middle east and Africa.
An NM400 wear-resistant steel was hot rolled and then the plates
were heat-treated by direct quenching and tempering and reheat
quenching and tempering techniques, respectively.
which is well received in middle east and Africa.
An NM400 wear-resistant steel was hot rolled and then the plates
were heat-treated by direct quenching and tempering and reheat
quenching and tempering techniques, respectively.
CONTACT US
PRODUCTS
Copyright © Qingdao Xinzhonglian Steel Co., Ltd.
We use optional cookies to improve your experience on our website, including through social media connections and to serve personalized advertising based on your online activity. If you reject optional cookies, we will only use cookies that are necessary to provide you with the service.