PRODUCT
7075 aluminum alloy is a cold - treated forging alloy, high strength, far better than mild steel.
7075 is one of the strongest alloys commercially available.
Thickness 0.1-400mm，etc
Length:100-12000mm，or as required
Width:20-3000mm，etc
Standard:ASTM，AISI，JIS，GB， DIN，EN
Certification:ISO, SGS，BV
Length:100-12000mm，or as required
Width:20-3000mm，etc
Standard:ASTM，AISI，JIS，GB， DIN，EN
Certification:ISO, SGS，BV
5083 belongs to Al-Mg-Si alloy, which is widely used, especially in the construction industry.
It is the most promising alloy. Good corrosion resistance, good weldability, good cold processing, and has moderate strength.
5083 is magnesium, which has good forming performance, corrosion resistance, weldability and medium strength.
5083 aluminum is one of the most widely used antirust
It is the most promising alloy. Good corrosion resistance, good weldability, good cold processing, and has moderate strength.
5083 is magnesium, which has good forming performance, corrosion resistance, weldability and medium strength.
5083 aluminum is one of the most widely used antirust
6082 is a heat-treatable alloy with good formability, weldability, machinability and corrosion resistance.
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.
This alloyhas similar but not identical mechanical properties to alloy 6061, and its -T6 state has higher mechanical properties.
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.
This alloyhas similar but not identical mechanical properties to alloy 6061, and its -T6 state has higher mechanical properties.
Thickness 0.1-400mm，etc
Length:100-12000mm，or as required
Width:20-3000mm，etc
Standard:ASTM，AISI，JIS，GB， DIN，EN
Certification:ISO, SGS，BV
Length:100-12000mm，or as required
Width:20-3000mm，etc
Standard:ASTM，AISI，JIS，GB， DIN，EN
Certification:ISO, SGS，BV
7075-T6 aluminum alloy hardness is 150HB, belongs to the high hardness aluminum alloy.
7075T6 aluminum alloy is precision machined aluminum in the United States, one of the most commercially available alloys.
The main alloying element of 7075 series is zinc, which has strong strength, good mechanical properties and anode reaction.
7075 aluminum heat treatment is because zinc is the main alloying element in 7075, adding magnesium to the alloy containing 3%-7.5% zinc can form a significant strengthening effect of MgZn2, so that the heat treatment effect of the alloy is far better than the al-zinc binary alloy; With the increase of zinc and magnesium content, the tensile strength of the alloy will be further improved, but its resistance to stress corrosion and spalling corrosion will decrease.
7075T6 aluminum alloy is precision machined aluminum in the United States, one of the most commercially available alloys.
The main alloying element of 7075 series is zinc, which has strong strength, good mechanical properties and anode reaction.
7075 aluminum heat treatment is because zinc is the main alloying element in 7075, adding magnesium to the alloy containing 3%-7.5% zinc can form a significant strengthening effect of MgZn2, so that the heat treatment effect of the alloy is far better than the al-zinc binary alloy; With the increase of zinc and magnesium content, the tensile strength of the alloy will be further improved, but its resistance to stress corrosion and spalling corrosion will decrease.
CONTACT US
PRODUCTS
Copyright © Qingdao Xinzhonglian Steel Co., Ltd.
We use optional cookies to improve your experience on our website, including through social media connections and to serve personalized advertising based on your online activity. If you reject optional cookies, we will only use cookies that are necessary to provide you with the service.