PRODUCT
ASTM A333 Seamless Steel Pipe
carbon and alloy pipes which are intended to be used at places of low temperatures.
The ASTM A333 pipes are used as heat exchanger pipes and pressure vessel pipes.
Classification ：
Product Description
Product introduction
ASTM A333 is the standard specification given to all the welded as well as seamless steel, carbon and alloy pipes which are intended to be used at places of low temperatures. The ASTM A333 pipes are used as heat exchanger pipes and pressure vessel pipes.
As it was stated in the above section, that these pipes are used in the areas where temperature is extremely low, they are used in large ice cream industries, chemical industries and other such places. They are used as transportation pipes and are categorized into different grades. The classification of grades of these pipes is done on different factors like temperature resistance, tensile strength, yielding strength and chemical compositions. The ASTM A333 pipes are furnished into nine different grades which are designated by the following numbers:1,3,4,6.7,8,9,10, and 11.
These pipes have an NPS 2"to 36". Though different grades have different temperature strike test the average temperature that these pipes can stand is from-45 degree C, to-195 degree C. The ASTM A333 pipes must be made with the seamless or welding process where there must be no filler in the metal during the welding process.
ASTM A333 standard covers wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. ASTM A333 alloy pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation. All seamless and welded pipes shall be treated to control their microstructure. Tensile tests, impact tests, hydrostatic tests, and nondestructive electric tests shall be made in accordance to specified requirements. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties.
ASTM A333 steel pipe production includes a series of visual surface imperfections to guarantee that they have been properly manufactured. ASTM A333 steel pipe shall be subject to rejection if surface imperfections acceptable are not scattered, but appear over a large area in excess of what is considered a workmanlike finish. The finished pipe shall be reasonably straight.
| Name | Seamless Steel Pipe |
| Product Classification | Carbon Steel, Low Carbon Steel, High Carbon Steel, Bearing Steel, Alloy Steel, Boiler Steel, Stainless Steel |
| Outside Diameter | 4Mm-1220Mm |
| Thickness | 0.3 Mm - 200 Mm |
| Length | 3000-13000Mm, Can Be Cut According To Requirements |
| Material | 1020 1045 4140 4130 4135 CK45 A179 A192 A106B A106C A210A1 A210C A53 ST37 ST52 S275 S355 API-5LGr. BX42-X80 A333Gr.6 P235GH P355GH 13CrMo4-5, 10CrMo9-10 P11 P12 P22 P91 T11 T12 T22 T91 410 430 201 202 301 302 303 304 321 316 347 316L 317H 316Ti 309S 310S 2520 2205 904L |
| Processing Pattern | Wire, Groove, Spray Paint,3PE Anti-Corrosion, Epoxy Resin Coating, Pickling Phosphating, Pickling Passivation |
| Executive Standard | ASTM ASME JIS DIN GB EN10216 |
| Delivery Status | Hot Rolling, Cold Drawing, Normalizing, Tempering, Quenching, Normalizing + Tempering, Normalizing + Quenching |
| Use | Machinery Manufacturing, Cold Storage Equipment, Oil Transportation, Chemical Equipment, Power Plant, Boiler Container, Geological Exploration, Shipbuilding, Hydraulic Support, Industrial Transportation, Auto Parts |
Warehouse Storage
Our major products including Carbon Steel Plate, Carbon Steel Coil, Carbon Steel Pipe, Carbon Steel Bar, Stainless steel plate,Stainless steel coil , Stainless steel pipe, color coated coil, color tile,galvanized sheet, galvanized coil, Galvanized roofing, galvanized zinc,etc.
 |
 |
 |
Aluminum pipe Galvanized pipe Stainless steel pipe
Packing And Shipping
For the steel industry, customer care is not just quality control,ontime delivery and offering good price, but also adding value through the services we provide. We work with customers to continuously improve steel quality to help customers obtain more efficient and effective manufacturing processes.Xinzhonglian Steel is also the only company that promises to take back products if they are not up to standard.
Honor
We have passed "ISO9001 quality system certification, and EU CE certification". Welcome to visit our factory to discuss, we hope to establish a long-term cooperative relationship with you.
RELATED PRODUCTS
MESSAGE
CONTACT US
PRODUCTS
Copyright © Qingdao Xinzhonglian Steel Co., Ltd.